Flagler Corporation Drive Turn Machinery

Drive Turn Machinery

Electric Cleatfolder Machines

Specifications:

The Flagler Open Throat Electric Cleatfolders are the fastest in the industry. Each model comes equipped with micro PLC controller, guard safety switch, and hardened bending bar.

Capacity: 20 Ga. and Lighter

Length of Cleat Edge: 1/2”

Cycle Time: Approx. 2 ¼ Seconds

Motors: 2 HP 230/3/60/1800 RPM.

1/3 HP 230/3/60/1800 RPM

Dimensions: EC-30 60" wide x 27" long

EC-36 66” wide x 27” long

Shipping Weight: EC-30 1,050 pounds

EC-36 1,150 pounds

Pneumatic Cleatfolder Machines

Specifications:

The Flagler Open Throat Pneumatic Cleatfolders come complete with 6 gallon surge tank so they can be operated from a standard 3/8” compressed air line. Each model comes equipped with micro PLC controller, guard safety switch, and hardened bending bar.

Capacity: 20 Ga. and Lighter

Length of Cleat Edge: 1/2”

Power Requirement: 120 Volt Control Power 100 PSI Compressed Air (3/8” Line)

Cycle Time: Approx. 4 Seconds (Light Gauge)

Approx. 6 Seconds (Heavy Gauge)

Dimensions: AC-24 54" wide x 27" long

AC-30 60” wide x 27” long

Shipping Weight: AC-24 850 pounds

AC-30 950 pounds

Drive Turn Hemmer

Specifications:

Rollform your drive turn hems on this machine after notching and prior to bending into L or full wrap sections. Simple select the sections to be hemmed with the selector switch and run through. The machine will hem the 1^st and 3^rd quadrants or the 2^nd and 4^th quadrants.

Capacity: 20 Ga. and Lighter.

Height of Flange: 1/2"

Speed: Approx. 100 feet per minute.

Motor: 5 HP 230/3/60/1800 RPM . (100 PSI Compressed Air (3/8” Line) also required.

Drive: Vee Belt.

Base: Arc Welded Steel. Heavy Top Plate

Dimensions: 68" long x 24" wide

Shipping Weight: Approximately 1,050 pounds.

Machine is equipped with an additional set of extended shafts for optional tooling.