Universal Machinery
Flagler Model H-2 1/2-7 Specifications:

This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.

Speed: 30 to 100 feet per minute.

Motor: 2 HP 230/460/3/60/1800 RPM.

Drive: Matched Double Vee Belt.

Base: Arc Welded Steel. Heavy top plate.

Dimensions: 56" long, 24" wide, 41" high, Feed table height 34 5/8"

Shipping Weight: Approximately 500 pounds.
Flagler Model H-2 1/2-10 Specifications:

This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.

Speed: 30 or 100 feet per minute.

Motor: 5 HP 230/460/3/60/1800 RPM.

Drive: Matched Double Vee Belt.

Base: Arc Welded Steel. Heavy top plate.

Dimensions: 68" long, 24" wide, 48" high, Feed table height 34 5/8"

Shipping Weight: Approximately 1050 pounds.

 

This machine is recommended when forming on prepainted stock or special profiles due to the individual micrometer adjustments on each of the top shafts.  There are (2) sets of extended shafts to form any of the profiles for the H-2 1/2-7 model or specially designed tooling.

Flagler Model H-257 Specifications:

This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.

Speed: 30 to 100 feet per minute.

Motor: 2 HP 230/460/3/60/1800 RPM.

Drive: Matched Double Vee Belt.

Base: Arc Welded Steel. Heavy top plate.

Dimensions: 56" long, 24" wide, 41" high, Feed table height 34 5/8"

Shipping Weight: Approximately 500 pounds.

This machine is recommended when forming on prepainted stock or special profiles due to the individual micrometer adjustments on each of the top shafts.  There are (2) sets of extended shafts to form any of the profiles for the H-2 1/2-7 model or specially designed tooling.

Flagler Model H-2510 Specifications:

This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.

Speed: 30 or 100 feet per minute.

Motor: 5 HP 230/460/3/60/1800 RPM.

Drive: Matched Double Vee Belt.

Base: Arc Welded Steel. Heavy top plate.

Dimensions: 68" long, 24" wide, 48" high, Feed table height 34 5/8"

Shipping Weight: Approximately 1050 pounds.


Made In The USA Since 1949

The Flagler Corporation
56513 Precision Dr. * Chesterfield, MI 48051
Ph: (586)749-6300 * Fax: (586)749-6363
info@flaglercorp.com

©2008 Flagler Corporation, All Right Reserved. Site designed by Cat 5 Technologies LLC